BCMaterials Fortnightly Seminars #33

"Development of new hight temperature shape memory alloys based NiMnGa system"
ANABEL PÉREZ
(BCMaterials)
Shape memory alloys (SMAs) with high transformation temperatures can enable the operation of many mechanical components designed to operate at temperatures above 300ºC, potentially impacting the automotive, aerospace, manufacturing and energy exploration industries. Ni-Mn-Ga based shape memory alloys have shown excellent thermomechanical properties as an active material that yields a large output strain. This system enables an easy tuning of the transformation behavior by composition. For this purpose we have performed a systematic compositional study of the Ni-Mn-Ga system in polycrystalline state and a preliminary study of the effect of thermo-mechanical cycling in single crystals. The single crystals have been grown by floating zone method.
"Magnetoelastic materials for sensor; studying the surface"
ARIANE SAGASTI
(BCMaterials)
The magnetoelastic resonators based on amorphous ferromagnetic materials can act as an excellent platform to detect a wide range of parameters due to the promoted shift on its resonant frequency not only by the applied magnetic bias field H, but also under the action of different physical parameters such as pressure, temperature, stress and mass loading. This change on the resonant frequency under the action of external influences make them suitable for applications in sensors. We want to develop a bio-sensor by using as platform a magnetoelastic Fe Co Si B composition ferromagnetic ribbon coated with an amphiphilic polymer. For that purpose the magnetic ribbon has been coated with a polymer and the surface topography change has been studied using AFM and SEM.
Related news
BCMaterials-eko puntu kuantikoei eskainitako astea
Ekainaren 30etik uztailaren 2ra, BCMaterialsek "Track the Twin" MSCA doktorego-sarearen bigarren workshopa hartu zuen, eta gure zentroa sare horren parte da. Europako proiektu honen helburua da puntu…Ana Jiménez Amaya, doktoratu aurreko ikertzaile berria
Ongietorria ematen diogu Ana Jiménez Amayari BCMaterials-eko doktoratu aurreko ikertzaile berri gisa. Gure zentroan sartzen da material mikro eta nanoegituratuen arloan lan egiteko, nanoinprimaketa…Gure IT saila Mikel Asurmendiren etorrerarekin hazten ari da
BCMaterials-eko ikertzaile-plantillaren hazkunde jarraitua zentroko zerbitzuetako langileenarekin batera gertatzen da. Zehazki, IT sailak laguntzaile tekniko berri bat jaso du: Mikel Asurmendi del…Inprimaketa funtzionalaren etorkizuneko profesionalei prestatuz
Ekainaren 25, 26 eta 27an, inprimaketa funtzionalean espezializatutako ikastaro baten egoitza izan zen BCMaterials, Functional Print Clusterrekin elkarlanean antolatua. Ikastaroak ia 40 parte-…