BCMaterials Fortnightly Seminar #82 Alberto Maceiras - Nelson Castro
ALBERTO MACEIRAS
(BCMATERIALS)
Optimized Magnetodielectric Coupling on High-Temperature Polymer-Based Nanocomposites
CoFe2O4 (CFO) ferrite nanoparticles with an average size of 15 nm were synthesized by a hydrothermal method and used to develop magnetodielectric (MD) composites with the piezoelectric copolyimide 2CN/0CN as polymer matrix. It is shown that the dielectric constant, dielectric loss, and saturation magnetization values of the composites increase with the increasing CFO content, being 4.4, 0.01, and 12 emu.g-1, respectively, for the sample with 20 weight percentage (wt.%) of ferrite. Additionally the large MD effect response (MDE(%)=10.15) and magnetodielectric coefficient (γ)=5.8x10-2) allows a new physical insight on the magneto-mechano-electrical interaction between magnetostrictive CFO and the polymer matrix. Such high MD response, the highest reported for polymer-based composite materials, can support innovative applications in the areas of sensors, actuators, and filters, among others
NELSON CASTRO
(BCMATERIALS)
Design, construction and validation of a new generation of bioreactors for tissue engineering applications
This doctoral project aims to, design, fabricate and validate a new generation of portable bioreactors for cell culture stimulation, in order to improve tissue engineering strategies, exploiting responsive materials microenvironments resembling some of the most common physical stimuli within the human body. Some stimuli can be produced by polymer-based scaffolds such as magnetoelectric, which can work as mechanical and electrical actuators. In this particular case, applying an alternated magnetic field to these transducers, they will vibrate and that mechanical stress will be applied directly in the cell culture process. Further, the mechanical variations can originate a varying electrical signal in a piezoelectric material. Literature in this field claims a cell proliferation enhancement up to 25% with mechanical and electrical stimulation. This project will develop two types of bioreactors: one of them with electromechanical stimuli (mechanical and electric stimuli) and another with magneto-mechanical and magnetoelectric stimuli. Both stimuli will be highly controlled by an electronic system. Thus, this project encompasses several fields of engineering such as device engineering, design, mechanics and electronics, having also into account proper material selection and the final biomedical application.
Related news
Nuevo artículo en ‘Mapping Ignorance’ sobre puntos de carbono
BCMaterials acaba de realizar una nueva contribución al blog de divulgación científica ‘Mapping Ignorance’, publicado por la Cátedra de Cultura Científica de la Universidad del País Vasco (EHU). El...BCMaterials lleva sus materiales para una vida mejor a la Zientzia Astea
BCMaterials participó en una nueva edición de la Zientzia Astea de la EHU, realizada entre el 3 y el 8 de noviembre. Como es habitual, nuestro centro ocupó uno de los txokos de ciencia activos...Charla invitada de Amparo Ruiz Carretero sobre electrónica supramolecular quiral (23 de noviembre)
El lunes 23 de noviembre, Amparo Ruiz Carretero, investigadora sénior ATRAE en el Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), impartirá una charla invitada en BCMaterials titulada «...BCMaterials llevó los MOFs y los hidrogeles a la feria BeZientzia 2026
BCMaterials participó los días 26 y 27 de octubre en BeZientzia, una feria científica celebrada en el edificio Ensanche de Bilbao. En ella se reunieron los cinco centros BERC de Bizkaia: Achucarro,...