BCMaterials´ first paper published at Applied Physics Letters

Applied Physics Letters has published BCMaterials first scientific paper "Transformation volume strain in Ni-Mn-Ga thin films"
I. R. Aseguinolaza,1 I. Reyes-Salazar,1 A. V. Svalov,1 K. Wilson,2 W. B. Knowlton,2 P. M€ullner,2 J. M. Barandiaran,1 E. Villa,3 and V. A. Chernenko1,4,a) 1BCMaterials and Department of Electricity and Electronics, University of the Basque Country (UPV/EHU),P.O. Box 644, Bilbao 48080, Spain 2Department of Materials Science and Engineering, Boise State University, Boise, Idaho 83725, USA 3CNR-IENI, C.Promessi Sposi, 29, Lecco 23900, Italy 4Ikerbasque, Basque Foundation for Science, Bilbao 48011, Spain
Abstract:
The temperature dependences of the lattice parameters and residual stress have been measured for a fine-grained Ni52.2Mn26.8Ga21.0 (at. %) thin film fabricated by sputter deposition onto a heated silicon wafer with SiNx buffer layer. The transformation volume strain in the film was found to be a lattice expansion during the forward martensitic transformation which is opposite to a volume contraction exhibited by bulk Ni-Mn-Ga alloys. This unusual effect can be explained by the substrate-induced residual stresses in the film and the difference in the elastic modulus of austenite and martensite. © 2012
American Institute of Physics. [http://dx.doi.org/10.1063/1.4772005]Related news
Una semana dedicada a los puntos cuánticos en BCMaterials
Del 30 de junio al 2 de julio, BCMaterials acogió el segundo workshop de la red doctoral MSCA ‘Track the Twin’, de la que nuestro centro forma parte. Este proyecto europeo tiene como objetivo mejorar...Ana Jiménez Amaya, nueva investigadora predoctoral
Damos la bienvenida a Ana Jiménez Amaya como nueva investigadora predoctoral en BCMaterials. Se incorpora a nuestro centro para trabajar en el área de materiales micro y nanoestructurados, con...Nuestro departamento de IT crece con la llegada de Mikel Asurmendi
El crecimiento sostenido de la plantilla investigadora de BCMaterials se ve acompañado por el del personal de servicios del centro. Concretamente, el departamento de IT recibe a un nuevo asistente...Formando a los futuros profesionales de la impresión funcional
Los días 25, 26 y 27 de junio, BCMaterials fue la sede de un curso especializado en impresión funcional, organizado en colaboración con el Functional Print Cluster. El curso reunió a casi 40...