PhD Results #7
BOSCO RODÍGUEZ
(BCMATERIALS)
Solid-state refrigeration is seen as a promisingly alternative to the less efficient conventional vapour-expansion refrigeration. Magnetocaloric materials are one of the best candidates for this magnetic refrigeration since they have a thermal behaviour towards an applied magnetic field. The aim of this work is to study magnetocaloric materials based on shape memory alloys (SMA) and its potential application to the solid state refrigeration. The most viable synthesis method for metamagnetic alloys with shape memory effect based on NiMnCoSn suitable for ink fabrication will be studied, as a preliminary step for an additive manufacturing process for flexible electronics. The materials to be fabricated will be heat treated and characterized magnetically and structurally. Also, a printable ink will be fabricated using the metallic powder obtained from a grinded ribbons of the synthetized alloy with the best magnetic properties. This alloy has to suffer a martensitic transformation at a temperature near to room temperature, to have low hysteresis and a change in adiabatic temperature (∆T_ad) of the order of one kelvin upon the variation of external magnetic field.
ANDER GARCÍA
(BCMATERIALS)
All-inkjet-printed organic thin-film field effect transistors
Transistors are basic components for integrated circuits and switches, and thus the basis for most of the electronics, especially consumer electronics available nowadays. They are considered as the most important electronic device and the key enabler of the digital revolution. Although traditionally fabricated through lithography processes, the possibility of manufacturing them by means of printing technologies has gained interest during the last several years, due to their characteristics such as high-throughput, large area and low-cost production. Organic field effect transistors use an organic component as the semiconductor layer (OSCs), thus enabling bendability and flexibility of the devices. In this seminar, I will briefly explain the operation principles of field effect transistors (FETs) and then discuss the differences between typical FETs and thin-film FETs (TFTs). Finally, I will present different possible topologies for these devices, and the challenges faced when manufacturing them making use of additive manufacturing technologies, in particular inkjet printing.Related news
BCMaterials-eko 2023ren urteko memoria
BCMaterials-ek 2023ko Urteko Memoria aurkeztu du. Joan den urtean zentroak izan zuen jarduera zientifikoaren alderdirik aipagarrienak biltzen ditu dokumentuak. Jarduera horrek gorantz jarraitzen du...Festival Pint of Science Bilbao 2024 (13-15 mayo)
BCMaterials colabora un año más con la edición de Bilbao del festival de divulgación científica Pint of Science. El centro ejerce también labores de coordinación del evento, que llevará a cuatro...BCMaterials abre su programa de plazas de doctorado 2024
BCMaterials ha abierto su programa de doctorado 2024 por el que ofrece 4 contratos predoctorales a estudiantes que quieran realizar su tesis en el centro. El perfil de las personas candidatas es el...Convocatoria para artículos – Número especial en ‘Polymers’
La investigadora de BCMaterials Dra. Carmen Rial ha sido seleccionado, junto con l Prof. Dr. M. Mounir Bou-Ali de la Universidad de Mondragón, como Editora Invitada del número especial de la revista...