BCMaterials Fortnightly Seminar #85 Sofía Domínguez - Cristian Mendes - Liliana Fernandes
SOFÍA DOMÍNGUEZ
(BCMATERIALS)
Metal organic frameworks for heavy metals elimination
Contamination of clean water resources by heavy metals is a major environmental concern. Therefore, research is focused on developing filters with high selective and capacitive active materials to capture heavy metals in order to solve this problem. MOFs, which are polymeric metal organic frameworks having an ordered and crystalline structure, have appeared as a novel and promising adsorbents among others such as composites, zeolites, silica nanoparticles, etc., due to their potential to capture different kind of organic and inorganic chemicals.
CRISTIAN MENDES
(BCMATERIALS)
The influence of the postcuring process on the properties of 3D printed pieces
The three-dimensional (3D) printing technology have changed the modern manufacturing of many objects. Thus, stereolithography (SLA), one 3D printing technique, is becoming at an important technique to construct numerous small pieces and, in particular, a much applied technique in research. However, it has numerous drawbacks such as the limited amount of materials available or the lack of knowledge of the properties of the final piece. For this reason, as it was observed that the curing during the printing process is incomplete, in this work it has been evaluated the influence of the postcuring process on the final properties of the printed pieces. Two type of postcuring process has been selected in this study, both at room temperature: the effect of the time, and the effect of the exposure to an UV light. Both postcuring methods have been proven effective to fully postcured the pieces after 30 hours. In addition, it has been observed that the thermal properties of the material do not depend on how the postcuring process is. Nevertheless, a homogenous high crosslinked material with better mechanical properties is obtained with the UV postcuring process.
LILIANA FERNANDES
(BCMATERIALS)
Magnetic field perturbations induced by thermoelectric effects
Magnetic fields arising from thermoelectric currents can contribute to the measurement degradation of sensitive instruments. This fact has been experienced in satellites and spacecrafts and can have important implications in orientation and communication systems. However, its origin is not completely understood and extend thermoelectric/ magnetic formulations to better understand specific conditions that occur in space mission scenarios and to predict the magnetic fields generated from thermoelectric currents in space mission environments is needed. Computational simulations have been used to study these thermoelectric/ magnetic effects to be further validated by experimental results with the objective of identifying and developing possible mitigation technologies.
Related news
BCMaterials coorganiza la 44º reunión del Grupo de Electroquímica de la RSEQ en Leioa
BCMaterials, en colaboración con la Facultad de Ciencia y Tecnología de la UPV/EHU, organiza la 44ª Reunión del Grupo Especializado de Electroquímica de la Real Sociedad Española de Química (RSEQ)....Número especial: ‘Chemistry in Ukraine’
The Chemical Record, revista de la Sociedad Química de Japón, ha publicado el número especial 'Chemistry in Ukraine', coordinado por el Ikerbasque Research Professor Stefan Wuttke en colaboración con...Nueva portada en ACS Biomaterials Science & Engineering
La publicación realizada por BCMaterials y colaboradores “Cryo-Electrohydrodynamic Jetting of Aqueous Silk Fibroin Solutions”, ha sido seleccionada como portada de la revista ACS Biomaterials...Charla invitada de Santiago Rodríguez el 26 de marzo
BCMaterials ofrecerá una nueva charla invitada el próximo 26 de marzo, con Santiago Rodríguez Jiménez, investigador postdoctoral del Departamento de Química de la Universidad de Cambridge (Reino...