BCMaterials Fortnightly Seminar #63: Irati Rodrigo & Imanol Landa
IRATI RODRIGO
(BCMATERIALS)
The design of a new AC magnetometer
Magnetic hyperthermia is a cancer therapy, where magnetic nanoparticles (MNP) placed inside the tumour act as heat sources activated by an externally applied magnetic field. These nanoparticles increase the temperature of the tumour cells causing the destruction of the tumour. One of the most important parameters of MNP used in magnetic hyperthermia is their specific absorption rate (SAR), which is the absorbed energy per unit of nanoparticle mass. Our group has developed an accurate AC magnetometer, which allow the quantification of SAR. This magnetometer calculates the SAR measuring the dynamic magnetization with two pick up coils. SAR is obtained from the integral of the dynamic magnetization vs the applied magnetic field (generated by an inductor). This AC magnetometer works in a wide frequency range of AC magnetic field (149–1030 kHz) and with large field intensity: up to 35 kA m−1 at low frequencies and up to 22 kA m−1 at high frequencies (above 1 MHz). The main aim of this these is to design and built a new AC magnetometer that will work in higher field intensities and add a temperature controller of the sample. This will allow us to measures SAR in different temperature, which is very important to study new non invasive thermometry methods in order to measure the temperature of the tissue during the treatment. Two new AC magnetometers have been designed and studied for this purpose. I have simulated the magnetic field and dissipated power of the inductor using Finite element method (FEM) variating the parameters of the inductor, and analysing the result I have choose the best design with the optimal parameters.IMANOL LANDA
(BCMATERIALS)
Electrochemical processes and discharge product characterization in non-aqueous Na-O2 batteries
The success of the electric vehicles (EVs) relies on the development of energy storage systems capable of providing a large driving ranges. Sodium-oxygen (Na-O2) batteries arise as a promising technology which improves the energy density provided by the currently market-dominating lithium-ion batteries (1100-1600 vs. 75-200 Wh kg-1, respectively). In this presentation I will firstly describe the basics on the operation of Na-O2 batteries. After that, I will show some electrochemical and materials characterizations experiments carried out during my PhD in order to give evidence of the processes occurring in the electrochemical cell.Related news
BCMaterials co-organizes the 44th meeting of the RSEQ Electrochemistry Group in Leioa
BCMaterials, in collaboration with the Faculty of Science and Technology of the university of the Basque Country (UPV/EHU), organizes the 44th Meeting of the Royal Spanish Society of Chemistry (RSEQ…Special Issue: ‘Chemistry in Ukraine’
The Chemical Record, a journal of the Chemical Society of Japan, has published the Special Issue ‘Chemistry in Ukraine’, coordinated by the Ikerbasque Research Professor Stefan Wuttke in…New Cover on ACS Biomaterials Science & Engineering
A contribution from BCMaterials and colleagues “Cryo-Electrohydrodynamic Jetting of Aqueous Silk Fibroin Solutions”, has been selected as a cover of the ACS Biomaterials Science & Engineering…Invited Talk by Santiago Rodríguez on March 26
BCMaterials will offer a new invited talk on March 26 with Santiago Rodríguez Jiménez, postdoctoral researcher at the Department of Chemistry at the University of Cambridge (United Kingdom). The…